Rebuild Your Press

We will use our professionally trained staff with over 75 years experience to inspect, report and complete the correct rebuilding process for your machine(s).
  1. BRUNO presses will be completely disassembled and inspected.The inspections include:
    • Die check for cracks
    • Measurements on bushing wear
    • Check flatness on press fabrications
    • Check parallelism and alignment on all bores
    • All pins will be checked for straightness and cracks
  2. The press will have the following items replaced:
    • All the bushings
    • Rod seals
    • Lube System lines and fittings
    • All pins polished
  3. The Hydraulic System will be completely flushed and cleaned:
    • New filters
    • New valves and o-rings
    • New Cylinders
    • Repaired pump
  4. The Electrical System will be completely new.
  5. Guarding will be completely new.
  6. BRUNO will then re-assemble the machine and do a complete testing of the system before shipping to your plant.
A BRUNO PRESS REBUILD WILL TAKE YOU FROM HERE:

TO HERE:
FH350T